|Grade||Genuine Rolex||3a swiss||swiss||automatic|
|Movement||Rolex Calibre 3235||Genuine Swiss Clone 3235 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Dial Color||Silver Dial|
Band Material: 316L. The raw material of this watch is the hardest 316L stainless steel, which is a highly durable and corrosion-resistant material.
Watch Case: 316L. The case is the most important part of the watch. 316L is one of the most heat-resistant stainless steel grades. Its corrosion resistance is very good, even at temperatures as high as 1100*F, without any further heat treatment.
Case Back: Solid. The sturdy back cover allows you to use and keep the watch longer.
Crystal: Sapphire Crystal. The design of crystal is that sapphire has higher impact resistance, air tightness and hardness than other materials, and the processing cost is also high, so it is mostly used in top watch brands. Tips: The A Replica is applied with mineral glass instead of sapphire.
Hand: Silver-tone. The hand design of the watch is silver-tone, which is the same color as your case color. It fits the watch well.
Second Markers: Minute Markers around the outer rim. As shown in the picture above, the second mark on the dial is the minute mark around the outer edge.
Dial Markers: Luminous Index. According to research, the human eye is sensitive to light at night and is a new type of sensor that can detect time in the dark. When receiving a signal from an external source, this sticks will light up. It then sends a signal to the computing device, telling it when to turn the lights on and off.
Luminiscence: Hands and Markers. The design of the watch’s luminiscence is hands and markers. These luminiscence makes your watch more refined and high-end.
Bezel Material: Stainless Steel. The watch bezel is the most expensive component of the watch. It is made of stainless steel bezel material. It needs to be durable and can resist abrasion. The design of stainless steel bezel material makes it suitable for the watch bezel because of its ability to withstand a lot of pressure and friction.
Clasp: Fold Over Clasp. This is a great way to protect and store your watch, to make it easier and quicker for the user to open and fold the case over to keep it secure.
Water Resistance: 30 meters. About the watch, the waterproof depth is 30 meters that’s enough for no worries. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Function: Date, Hour, Minute, Second. Re-engraved watch function, the watch is equipped with a chronograph function to measure time, a minute dial to estimate the current time, and a stop dial to estimate the time after the interval.